• 45A of cutting power.
• High Duty cycle: 100% @ 30A, 60% @35A.
• Tested in (104°F/40°C), designed for the toughest conditions.
• High-quality and durable Plasma torch included. Common easy to replace consumables available all • over North America.
• Ability to cut expanded metals and uneven surfaces.
• Pilot arc (no HF) improves cutting on dirty and/or rusted metals.
• Automatic shut-off if air pressure is too low or disconnected (extends consumable life).
• All re-strike for quick cutting of material with gaps.
• Internal pressure switch to maintain the machine within safe low- & high-pressure parameters.
• Internal pressure regulator with built in dirt and moisture separator/filter.
• Comprehensive 3 Year Warranty.
CANAWELD Plasma Cutting CUT 45 D
The Plasma CUT45 D is a powerful and portable Plasma cutting machine. This unit can clean cut 5/8-inch (15mm) thick steel and it can sever cut up to 0.8-inch (20mm) thick steel. It’s powerful, lightweight design and dual voltage capability make it perfect for use with a generator or in the shop. A must-have for welders who demand quick cuts with precision.
| Input Voltage, Single Phase, 50/60 Hz | 208 to 240 V(±10%) |
|---|---|
| Primary Current@Max Welding Current | 23 A |
| Maximum Primary Effective Current (I1 eff max) | 13 A |
| Ignition | No HF |
| Maximum Cutting Current | 45 A |
| Duty Cycle @ Maximum Cutting Current in 104° F (40° C) | 30% (45 A) |
| Cutting Current @ 100% Duty Cycle in 104° F (40° C) | 30 A |
| Cutting Current @ 60% Duty Cycle in 104° F (40° C) | 35 A |
| Open Circuit Voltage : Volt | 290 V |
| Severance Cutting Thickness of Solid Steel : inch (mm) | 0.8 in (20 mm) |
| Maximum Clean Cutting Thickness of Solid Steel : inch (mm) | 5/8 in (15 mm) |
| Recommended Air Flow/Air Pressure | 4.0 cfm ( 115 L/min) at 73 psi (500 kpa) |
| Weight : lb. (Kg) | 27 lb. (12.5 Kg) |
| Dimensions Including Handle (D, W, H) : inch (mm) | 19 x 7 x 13.5 inch (485 x 180 x 345 mm) |
There are no reviews yet.