Vespa Pressure tanks

Availability : in stock
Categories: ,

VESPA PRESSURE tanks are ideally suited for a wide range of applications, including booster systems, thermal expansion, irrigation systems, and hydraulic hammer arresting. The Vespa Pressure Tank Series is constructed of a virgin polypropylene liner combined with an FDA compliant high-grade butyl diaphragm. This is held against the wall of the tank with a steel clench ring. The brass air valve, sealed by a threaded O-ring valve cap, prevents air leaks. Water enters the tank through a patented stainless-steel water connection. The diaphragm and liner are both reinforced in specific wear areas for longer life. All internal parts including the air valve are rounded to prevent piercing of the diaphragm in extreme conditions. The water connection uniquely provides a dual water/air seal ensuring a complete leak-free and maintenance-free pressure tank.

On the exterior the almond-colored dual-layer polyurethane paint finish provides hundreds of hours of UV and salt spray protection.

Vespa pressure tanks are quality tested at several stages on the production line to ensure the structural integrity of every tank.

Vespa pressure tanks represent the best value for the investment and are the best quality pressure vessels available today.


Product Series Name:  VESPA PRESSURE TANK

Nominal Volumes: 2 – 150 L / 0.5 – 39.6 gal Min.

Operating Temperature: -10°C / 14°F (Avoid Freezing)

Max. Operating Temperature: 90°C / 194°F     10 bar | 150 psi

Max. Operating Pressure: (Available in 16 and 25 bar as Max and UltraMax series)

Factory Pre-charge: 1.9 bar | 28 psi

There are no reviews yet.

Be the first to review “Vespa Pressure tanks”

Your email address will not be published. Required fields are marked *