| Conductor size | φ75 mm (max) |
|---|---|
| Rated current | AC 50A |
| Output voltage | AC 500mV/ AC 50A (10mV/A ) |
| Accuracy | ±1.0%rdg±0.5mV (45 – 65Hz) (0 – 50A) ±1.5%rdg±0.5mV (40 – 300Hz) (0 – 20A) ±1.5%rdg±0.5mV (300Hz – 1kHz) (0 – 5A) |
| Phase shift | within ±3.0° (45 – 65Hz) within ±4.0° (40Hz – 1kHz) |
| Cable length | Approx. 3m |
| Output connector | MINI DIN 6PIN |
| Output impedance | 100Ω or less |
| Applicable standards | IEC 61010-1, IEC 61010-2-032 CAT IV 300V / CAT III 600V Pollution degree 2, IEC 61326 |
| Operating temperature & humidity range | -10 to 50°C, Relative humidity 85% or less (no condensation) |
| Dimensions | 65（Ｌ）×24（Ｗ）×22（Ｄ）mm |
| Weight | Approx. 170 g |
| Included Accessories | 9095 (Carrying case) Instruction manual Cable marker |
FLEXIBLE CLAMP SENSOR KEW 8135
Flexible Clamp Sensor that is very useful for measuring low current around 5A
・Conductor size max.φ75mm
・Can measure AC current up to 50A
・Flexible and light weight by the air core coil used at the sensor part
・Designed to meet the international safety standard IEC 61010-1
CAT IV 300V, CAT III 600V
There are no reviews yet.