Ultrasonic Thickness Gauge PCE-TG 300-NO7

Availability : in stock


Ultrasonic thickness gauge
Large measuring range / Up to 600 mm / Pulse-echo or echo-echo mode /  For all homogeneous materials / Print function via Bluetooth / USB connection
The PCE-TG 300-NO7 is an ultrasonic thickness gauge with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the thickness meter and thus adapted to a wide variety of materials.
The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured (only with PCE-TG 300-P5EE sensor).


– Large measuring range
– Various sensors available
– Battery operation
– Error and voids detection
– Internal measurement data memory
– Print via Bluetooth


PCE-TG-NO7 sensor
Measuring range 0.65 … 200 mm / 0.025 …  7.87″ (steel)
Minimum diameter of pipes 15 x 2 mm / 0.59 x 0.07″
Frequency 7 MHz
Diameter 6 mm / 0.23″
Description for thin-walled or strongly curved pipes
PCE-TG 300-NO7 device
Measuring range P-E: pulse-echo mode 0.65 … 600 mm / 0.025 … 23.62″ (steel)”
(measurement range varies depending on the sensor)
E-E: Echo-Echo mode 2.50 … 100 mm / 0.098 … 2.36″
(only with PCE-TG 300-P5EE sensor)
Accuracy ±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm)
H refers to the material thickness of the workpiece
Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Measurable materials metals
epoxy resin
and all homogeneous materials
Working modes Pulse-echo mode (fault and void detection)
Echo-echo mode (hide layer thicknesses, e.g. paint)
Calibration sound velocity calibration
zero calibration
two-point calibration
View Mode Normal Mode, Scan Mode, Difference Mode
Units mm / inch
Data transfer printing via Bluetooth / USB 2.0
Memory non-volatile memory with 100 data groups with 100 data sets each
Operating time continuous operation 100 h
automatic stand-by mode (adjustable)
auto power off mode (adjustable)
Power supply 4 x AA battery 1.5 V
Display 320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions 0 … +50 °C / 32 … 122 °F, ≤80 % RH non-condensing
Storage conditions -20 … +70 °C / -4 … 158 °F, ≤80 % RH non-condensing
Dimensions 185 x 97 x 40 mm / 7.2 x 3.8 x 1.5″
Weight 375 g / 13.2 oz


1 x Ultrasonic thickness gauge PCE-TG 300-NO7
1 x Sensor PCE-TG-NO7
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual

There are no reviews yet.

Be the first to review “Ultrasonic Thickness Gauge PCE-TG 300-NO7”

Your email address will not be published. Required fields are marked *